-
Using the Output Plug to Drive a Solenoid
Output plug: http://cafe.jeelabs.net/lab/op1/#index3h1 JeeNode v5: http://talk.jeelabs.net/topic/207 “To drive a small lamp or motor, you connect it between COM and the output pin(s), and you connect the power supply between COM and GND. You can probably find many examples when googling for details regarding the ULN2803 chip on that board.”
-
Halloween Lightbox
Using the Dimmer Plug and a Jeenode to create a box of LEDs that blinks when tilted, with a brightness control (and future wireless capability…) Check the PCA9635 data sheet for programming details. Took me a bit to figure out how to vary the brightness of each LED individually, and to turn them on in…